top of page

EDGEBANDERS

QUALITY AND VALUE MATTER

Edgebanders from Pro Edge Technology are loaded with standard features other manufacturers sell as upgrades. And with our two-year warranty, you can be assured that quality and durability are at the core of our construction.

As with most other equipment from Pro Edge, all edgebanders are equipped with SDT (Self Diagnostic Technology) in order to reduce the need and expense of service visits. While other equipment use "daisy-chains" of safety circuits which make it difficult for the operator to determine what caused a machine to stop, Pro Edge machines deliver specific, comprehensive information. This allows the operator to self-diagnose the issue, often eliminating the need for tech support or service calls.

PETII_edited.png

PET II Edgebander

From the Infeed to Buffing, each station is independent for a more serviceable machine. Whether you are using coil-type edgebanding or pre-cut edgebanding strips, this machine was designed to meet the high quality standards of today’s market demands. It handles short to long production runs, and delivers a high quality finished product that doesn’t require touching up after exiting the machine.

PREMILL
Premill_edited.jpg
GLUE
Glue%20Application_edited.jpg
STRIP FEED
Strip%20Feed_edited.jpg
PRESSURE ROLLERS
Pressure%20Station_edited.jpg
END TRIM
End%20Trim_edited.jpg
SUPER FINISH
Super%20Finish_edited.jpg
FLAT SCRAPE
Flat%20Scrape_edited.jpg
BUFFING
Buffing_edited.jpg

Download

Brochure

PRESSURE ROLLERS
PRESSURE ROLLERS
PET II Glue Station_edited.png
GLUE STATION
PREMILL STATION
PET II Digital Lubrication.jpg
DIGITAL LUBRICATION
  • Premill station is equipped with two compression diamond tipped milling heads

  • Glue application controlled by pneumatic metering wiper and hardened application roller

  • 4-roller pressure station

  • Adjustable pneumatic-controlled Guillotine with an independent switch for cutting PVC tape, 3mm PVC tape, and all types of wood veneers and plastic laminates

  • Twin end trim motors ride on prismatic bearing guides providing one of the strongest and most secure end trim stations

  • The PET II offers the option of switching a radius scrape station rather than a Flat Scraper (additional charges apply)

Check out Compatible Equipment

pet3_edited.png

PET III Edgebander

From the Infeed to Buffing, each station is independent for a more serviceable machine. Whether you are using coil-type edgebanding or pre-cut edgebanding strips, this machine was designed to meet the high quality standards of today’s market demands. It handles short to long production runs, and delivers a high quality finished product that doesn’t require touching up after exiting the machine.

The PET III differs from the PET II in that it exchanges an Extra Super Finish Station which serves as a rough trim station to remove 95-98% of the edgebandings top and bottom edge.

PREMILL
Premill_edited.jpg
GLUE
Glue%20Application_edited.jpg
STRIP FEED
Strip%20Feed_edited.jpg
PRESSURE ROLLERS
Pressure%20Station_edited.jpg
END TRIM
End%20Trim_edited.jpg
EXTRA SUPER FINISH STATION
ROUGH%20FINISHER_edited.jpg
FLAT SCRAPE
Flat%20Scrape_edited.jpg
BUFFING
Buffing_edited.jpg
1 PET IV New 2025_no bkgd_shadow_edited_

The new PET IV 55" Return Conveyor is ideal for both the high production panel processing shop or the custom production shop. It's loaded with features that are upgrades on our competitors’ machines such as oscillating buffing and an innovative inverted quick-change glue pot that reduces burnt glue and mess and allows for color changes in under 5 minutes!  From premill to buffing, each station is independent for a more serviceable machine. The PET IV runs coil-type edgebanding as well as pre-cut edgebanding strips. From short to long production runs, our high quality finished product doesn’t require touching up after exiting the machine.

The PET IV is also equipped with SDT (Self Diagnostic Technology) to reduce the need for service visits. It's a robust machine you can't afford to overlook.

END TRIM
End%20Trim_edited.jpg
ROUGH TRIM
SUPER FINISH STATION
2-MOTOR CORNER ROUND
ROUGH%20FINISHER_edited.jpg
PREMILL
Premill_edited.jpg
GLUE
Glue%20Application_edited.jpg
STRIP FEED
Strip%20Feed_edited.jpg
PRESSURE ROLLERS
Pressure%20Station_edited.jpg

PET IV Edgebander

NEW icon.png
PET IV New Edgebander Cover Image.jpg

Download

Brochure

3MM RADIUS
SCRAPE
3MM%20RADIUS%20SCRAPE_edited.jpg
FLAT SCRAPE
Flat%20Scrape_edited.jpg
OSCILLATING
BUFFING
Buffing_edited.jpg
  • Set of counterrotating, diamond compression milling heads for sharp, clean edge

  • Misting station to remove glue or dust for a clean finish

  • 4-roller pressure station, each roller supplied with Self-Cleaning Razor Scraper

  • PLC-controlled tape heater and tunnel, making edge banding pliable (1,2, or 3mm)..a must for colder climates

  • Adjustable pneumatic-controlled guillotine with an independent switch for cutting PVC tape, 3mm PVC tape, and all types of wood veneers and plastic laminates

  • No-Go Bar prevents panels from running too close together

  • Premill station with two compression, diamond-tipped milled heads for removal of tooling marks

  • Quartz heater for edge of panel prior to gluing for a more stable glue application in all types of environments

  • PQC offers fast, precise movement of the 1st top and bottom trim station for selected material to be applied

  • Radius top and bottom profile scraper station with "Ribbon Puller" for a clean run down the line
  • Top and bottom trimmers with diamond milling heads, and heavy-duty metal dust shrouds on milling head
  • Two-motor corner rounding station for trimming straight, chamfered, bull-nosed and post formed panels
  • Oscillating buffing features two independent, heavy-duty  3-phase motors to soften and polish the sharp edges on the panel
  • 10" Delta HMI touchscreen controller is not Windows based so it is not effected by the constant upgrades
  • Stand-alone quick change glue pot station is standard for extremely easy maintenance and quick color changes

Check out Compatible Equipment

HOT AIR BLOWER & TUNNEL
10. 2nd and 3rd quick change glue pots_mod_RGB .jpg
GLUE STATION WITH 2 POTS
4 HMI touch screen for operator_RGB.jpg
10" DELTA HMI TOUCHSCREEN
5.5 Front and Rear missing stations_RGB.jpg
MISTING
STATION
6.1 Quartz heater for edge of panel to glue_RGB.jpg
QUARTZ
HEATER
7.1 PLC controlled NO-G)_BAR_RGB.jpg
NO-GO BAR
12.7 Independently adjustable four roller pressure station_RGB.jpg
4 ROLLER PRESSURE STATION
11 Pre-mill station_RGB.jpg
PREMILL
STATION
13.1 Rear end trim saw_RGB .jpg
END TRIM STATION
15.1 Two Motor Corner Rounding station_RGB.jpg
CORNER ROUNDING
16.2 Radius top and bottom profile scraper station_RGB.jpg
PROFILE SCRAPING
17.3 Flat Scrape, uses standard carbide insert cutters_RGB.jpg
FLAT SCRAPING
19.3 Oscillating Top and Bottom buffers_RGB.jpg
OSCILLATING BUFFING
guillotine image.jpg
GUILLOTINE
18 Motorized adjustable pressure beam_RGB.jpg
MOTORIZED
PRESSURE BEAM
8 Adjustable In-feed fence with digital readout_RGB.jpg
ADJUSTABLE INFEED FENCE
11.5 Robust construction and heavy duty guides_RGB.jpg
ROBUST
CONSTRUCTION
  • Adjustable pneumatic-controlled Guillotine with an independent switch for cutting PVC tape, 3mm PVC tape, and all types of wood veneers and plastic laminates

  • Glue application controlled by pneumatic metering wiper and hardened application roller

  • Glue station is on a swivel for quick change pots (no lower glue pot chamber to clean!)

  • Motorized adjustable pressure beam with digital readouts increases efficiency for faster easier setup and changeover

  • Automatic lubrication system used to lubricate the main drive chain track pads and linear bearings on end trim station

  • Robust construction and heavy-duty guides

  • Equipped with SDT (Self-Diagnostic Technology) to reduce the need for service visits

Check out Compatible Equipment

bottom of page